.

Home  |  Products  |  Contact Tolber  |  Distributors  |  Special Offers

MICCROTAPE


BLACK MICCROTAPE
TAPERED EDGES Color: Black Thickness: Varies between .012 and .005 Width: 3/4 in.

Length: 170 ft. per roll

Adhesion: No adhesion. Miccrotape Cement provides for sealing ends when baking or fusion is not possible. Excellent for most plating cycles and plating racks. Maximum temperature 190 F.

NOT RECOMMENDED FOR CHLORINATED SOLVENTS Half ounce tube of cement included with each roll.

MICCROTAPE 1210 SELF-ADHESIVE

Color: Yellow
Thickness: 5 1/2 to 6 mils.
Widths: Available in 1"; and 2"; rolls
Length: 166 ft. per roll
Flexibility: Will conform to a straight edge without undercutting.
DO NOT STRETCH ON A FLAT SURFACE.
Excellent self-adhesive abilities for electroless nickel, type II and III anodizing, chemical milling,
abrasive blasting. Virtually all plating solutions from 150-210 F.

MICCROTAPE 1220 SELF-ADHESIVE Color: Green Thickness: 7 mils. Widths: Available in 1" and 2" rolls Length: 180 ft. per roll Flexibility: Not recommended for flexing

Excellent self adhesive abilities for high temperature (220 F+) electroless nickel plating. Very little or no residue when removed.

TOLBER DIVISION EMERGENCY PHONE NUMBER 1-800-264-2533 extension 2584

WARRANTY DISCLAIMER. Based upon Seller's experience, the information contained herein is believed to be reliable. Seller requests that Purchasers and users inspect and test Seller's products as to contents and suitability for a particular purpose. Seller disclaims any express warranties and nothing contained herein shall constitute any warranty, whether express or implied, and Seller hereby DISCLAIMS ALL WARRANTIES OR MERCHANTABILITYAND FITNESS FOR A PARTICULAR PURPOSE. Additionally, Seller makes no warranties concerning the compliance of products with any state, local, or federal laws or regulations and Purchaser assumes full responsibility for complying with such laws, regulations, codes and requirements. Seller makes no warranty concerning and does not assume in this or any other document any obligation or liability in connection with patent infringement suits brought against Purchaser, user and/or Seller with respect to Seller's products. The EXCLUSIVE REMEDY for all proven claims whether through negligence, strict liability, tortor otherwise is limited to an amount equal to the price of the particular products or services giving rise to the liability, or, at the election of the Seller, the replacement of the product in question. In no event shall Seller be liable to Purchaser for any incidental, consequential, indirect, or special damages, including without limitation, lost revenues or profits, even if Seller was advised of the possibility of such lost revenues or profits, (subject to state by state application of Mag-Moss [1 6CFR701.3]).
 

Back to Top

Home  |  Products  |  Contact Tolber  |  Distributors  |  Special Offers

We accept:

 
Tolber Chemical
220 West 5th St.  * Hope, Arkansas  *  71801
Phone 870-777-3251 or Fax 870-777-8056

E-mail us at tolbermail@sbcglobal.net