Home

MICCRO SAFE-STRIP "C"

Environmentally-Preferred, Non-flammable Remover
for Miccrostop, Miccroshield, and Miccropeel.

SAFE STRIP "C" is an environmentally-preferred, non-flammable material designed for the removal of Stop-off Lacquers. It is also a cured paint and cured resin solvent. This product is an effective replacement for acetone, methyl ethyl ketone or the chlorinated solvents that have been used to remove the Stop-off Lacquers. It can also replace methylene chloride, toluene, benzene and other hazardous solvents traditionally used for paint clean-up and paint removal. It has a much lower Inhalation Hazard Index than MEK, making it a safer chemical to use in commercial and industrial applications.It is not an ozone depleter.

MICCRO SAFE-STRIP "D"

Masking Wax Removal without Vapor Degreasers or Hazardous Solvents.

Miccro Safe-Strip "D" is specifically designed forFremoving high-melting solids such as waxes, pitches, greases, fixturing compounds and buffing compounds. Its high flash point and low odor make it ideal for use in applications where elevated temperatures aid in soil removal. Miccro Safe-Strip "D" is particularly effective for removing masking waxes used in metal plating operations and waxes, pitches, and thermoplastics used as fixturing agents in the optics, wafer, and jet engine industries. Safe-Strip "D" is also effective for removing most common metalworking soils including oils, greases, lubricants, coolants, and dye penetrants.

MICCRO SAFE-STRIP "F"

Environmentally Preferred, Non-flammable Remover
for WB-018 and general purpose paint remover.

SAFE STRIP "F" is an environmentally preferred, non-flammable material designed for the removal of Stop-off Lacquers. It is also a cured paint and cured resin solvent. This product is an effective replacement for acetone, methyl ethyl ketone or the chlorinated solvents that have been used to remove the Stop-off Lacquers. It can also replace methylene chloride, toluene, benzene and other hazardous solvents traditionally used for paint clean-up and paint removal. It has a much lower Inhalation Hazard Index than MEK, making it a safer chemical to use in commercial and industrial applications.It is not an ozone depleter

Back to Top